soulspeeddownload.blogg.se - 3ds mods sd card

Load the SD card into a reader for your computer to use. This could damage the card to the point it cannot be used by the radio or the computer. The card will "eject" and be ready to remove.Īt all times be sure you do NOT touch to gold contacts. It may not seem normal but you press the SD card to release it from the slot. Step 7: Remove the SD card from the slot for use in the computer. appears on the face of the radio when the process finishes. The process takes only a matter of seconds to complete. The details of the radio will be transferred to the SD card. Step 6: Press OK to select then OK again to begin the process Even in a new radio there are details that the Programmer uses to identify your radio. This will transfer all the details of your radio to the SD card. Press the key again to select this option.

Try removing and replacing the SD card or try another card. Note: If the text of the SD Card option is not a red color, the SD card is either not seated properly in the radio or is not being recognized.

Step 3: Touch the SD card option to select. Step 2: With the radio on, press hold for 1 second the key on the face of the radio to access the menu.

The card will not work if it is not seated properly in the slot and will probably be ruined if you manage to force it into the space behind the slot.

Even the Operating manual warns of this on page 20.

Be VERY CAREFUL that you do not try to insert the card behind the slot.

Gently press the card into the slot until it clicks and stays firmly in place.

The gold "teeth" will be facing you and will go into the radio first.

(Yes, this is upside-down from traditional convention.)

Presuming you are right handed and working such that you are looking at the front of the radio, the teeth of the card will be facing you.

There is only one way the card will fit.

Step 1: With the radio off, insert the SD card into the slot on the side of the radio market Micro SD. These steps will help you through that process.

This may be your first experience working with the SD card and the data transfer process. Memory channel details are not important in this process. This information can be retrieved only from the radio. This gives the YPS-FT3D Programmer the details it needs to identify the radio (worldwide version, modification status, and other "behind the scenes" details). Programming the Yaesu FT-3D radio begins with getting data from the radio. Getting the initial details from the radio. Programming the Yaesu FT-3D with a micro SD card.